Partitioned tables¶
Table of contents
Introduction¶
A partitioned table is a virtual table consisting of zero or more partitions. A partition is similar to a regular single table and consists of one or more shards.
partitioned_table
|
+-- partition 1
| |
| +- shard 0
| |
| +- shard 1
|
+-- partition 2
|
+- shard 0
|
+- shard 1
A table becomes a partitioned table by defining partition columns. When a record with a new distinct combination of values for the configured partition columns is inserted, a new partition is created and the document will be inserted into this partition.
A partitioned table can be queried like a regular table.
Partitioned tables have the following advantages:
The number of shards can be changed on the partitioned table, which will then change how many shards will be used for the next partition creation. This enables one to start out with few shards per partition initially, and scale up the number of shards for later partitions once traffic and ingest rates increase with the lifetime of an application.
Partitions can be backed up and restored individually.
Queries which contain filters in the
WHERE
clause which identify a single partition or a subset of partitions is less expensive than querying all partitions because the shards of the excluded partitions won’t have to be accessed.Deleting data from a partitioned table is cheap if full partitions are dropped. Full partitions are dropped with
DELETE
statements where the optimizer can infer from theWHERE
clause and partition columns that all records of a partition match without having to evaluate against the records.
Partitioned tables have the following disadvantages:
If the partition columns are badly chosen you can end up with too many shards in the cluster, affecting the overall stability and performance negatively.
You may end up with empty, stale partitions if delete operations couldn’t be optimized to drop full partitions. You may have to watch out for this and invoke
DELETE
statements to target single partitions to clean them up.Some optimizations don’t apply to partitioned tables. An example for this is a GROUP BY query where the grouping keys match the
CLUSTERED BY
columns of a table. This kind of query can be optimized on regular tables, but cannot be optimized on a partitioned table.
Note
Keep in mind that the values of the partition columns are internally base32 encoded into the partition name (which is a separate table).
So, for every partition, the partition table name includes:
The table schema (optional)
The table name
The base32 encoded partition column value(s)
An internal overhead of 14 bytes
Altogether, the table name length must not exceed the 255 bytes length limitation.
Caution
Every table partition is clustered into as many shards as you configure for the table. Because of this, a good partition configuration depends on good shard allocation.
Well tuned shard allocation is vital. Read the sharding guide to make sure you’re getting the best performance out of CrateDB.
Creation¶
It can be created using the CREATE TABLE statement using the PARTITIONED BY:
cr> CREATE TABLE parted_table (
... id bigint,
... title text,
... content text,
... width double precision,
... day timestamp with time zone
... ) CLUSTERED BY (title) INTO 4 SHARDS PARTITIONED BY (day);
CREATE OK, 1 row affected (... sec)
This creates an empty partitioned table which is not yet backed by real partitions. Nonetheless does it behave like a normal table.
When the value to partition by references one or more Base Columns, their values must be supplied upon INSERT or COPY FROM. Often these values are computed on client side. If this is not possible, a generated column can be used to create a suitable partition value from the given values on database-side:
cr> CREATE TABLE computed_parted_table (
... id bigint,
... data double precision,
... created_at timestamp with time zone,
... month timestamp with time zone GENERATED ALWAYS AS date_trunc('month', created_at)
... ) PARTITIONED BY (month);
CREATE OK, 1 row affected (... sec)
Information schema¶
This table shows up in the information_schema.tables
table, recognizable as
partitioned table by a non null partitioned_by
column (aliased as p_b
here):
cr> SELECT table_schema as schema,
... table_name,
... number_of_shards as num_shards,
... number_of_replicas as num_reps,
... clustered_by as c_b,
... partitioned_by as p_b,
... blobs_path
... FROM information_schema.tables
... WHERE table_name='parted_table';
+--------+--------------+------------+----------+-------+---------+------------+
| schema | table_name | num_shards | num_reps | c_b | p_b | blobs_path |
+--------+--------------+------------+----------+-------+---------+------------+
| doc | parted_table | 4 | 0-1 | title | ["day"] | NULL |
+--------+--------------+------------+----------+-------+---------+------------+
SELECT 1 row in set (... sec)
cr> SELECT table_schema as schema, table_name, column_name, data_type
... FROM information_schema.columns
... WHERE table_schema = 'doc' AND table_name = 'parted_table'
... ORDER BY table_schema, table_name, column_name;
+--------+--------------+-------------+--------------------------+
| schema | table_name | column_name | data_type |
+--------+--------------+-------------+--------------------------+
| doc | parted_table | content | text |
| doc | parted_table | day | timestamp with time zone |
| doc | parted_table | id | bigint |
| doc | parted_table | title | text |
| doc | parted_table | width | double precision |
+--------+--------------+-------------+--------------------------+
SELECT 5 rows in set (... sec)
And so on.
You can get information about the partitions of a partitioned table by querying
the information_schema.table_partitions
table:
cr> SELECT count(*) as partition_count
... FROM information_schema.table_partitions
... WHERE table_schema = 'doc' AND table_name = 'parted_table';
+-----------------+
| partition_count |
+-----------------+
| 0 |
+-----------------+
SELECT 1 row in set (... sec)
As this table is still empty, no partitions have been created.
Insert¶
cr> INSERT INTO parted_table (id, title, width, day)
... VALUES (1, 'Don''t Panic', 19.5, '2014-04-08');
INSERT OK, 1 row affected (... sec)
cr> SELECT partition_ident, "values", number_of_shards
... FROM information_schema.table_partitions
... WHERE table_schema = 'doc' AND table_name = 'parted_table'
... ORDER BY partition_ident;
+--------------------------+------------------------+------------------+
| partition_ident | values | number_of_shards |
+--------------------------+------------------------+------------------+
| 04732cpp6osj2d9i60o30c1g | {"day": 1396915200000} | 4 |
+--------------------------+------------------------+------------------+
SELECT 1 row in set (... sec)
On subsequent inserts with the same partition column values, no additional partition is created:
cr> INSERT INTO parted_table (id, title, width, day)
... VALUES (2, 'Time is an illusion, lunchtime doubly so', 0.7, '2014-04-08');
INSERT OK, 1 row affected (... sec)
cr> REFRESH TABLE parted_table;
REFRESH OK, 1 row affected (... sec)
cr> SELECT partition_ident, "values", number_of_shards
... FROM information_schema.table_partitions
... WHERE table_schema = 'doc' AND table_name = 'parted_table'
... ORDER BY partition_ident;
+--------------------------+------------------------+------------------+
| partition_ident | values | number_of_shards |
+--------------------------+------------------------+------------------+
| 04732cpp6osj2d9i60o30c1g | {"day": 1396915200000} | 4 |
+--------------------------+------------------------+------------------+
SELECT 1 row in set (... sec)
Update¶
Partition columns cannot be changed, because this would necessitate moving all affected documents. Such an operation would not be atomic and could lead to inconsistent state:
cr> UPDATE parted_table set content = 'now panic!', day = '2014-04-07'
... WHERE id = 1;
ColumnValidationException[Validation failed for day: Updating a partitioned-by column is not supported]
When using a generated column as partition column, all the columns referenced in its generation expression cannot be updated either:
cr> UPDATE computed_parted_table set created_at='1970-01-01'
... WHERE id = 1;
ColumnValidationException[Validation failed for created_at: Updating a column which is referenced in a partitioned by generated column expression is not supported]
cr> UPDATE parted_table set content = 'now panic!'
... WHERE id = 2;
UPDATE OK, 1 row affected (... sec)
cr> REFRESH TABLE parted_table;
REFRESH OK, 1 row affected (... sec)
cr> SELECT * from parted_table WHERE id = 2;
+----+------------------------------------------+------------+-------+---------------+
| id | title | content | width | day |
+----+------------------------------------------+------------+-------+---------------+
| 2 | Time is an illusion, lunchtime doubly so | now panic! | 0.7 | 1396915200000 |
+----+------------------------------------------+------------+-------+---------------+
SELECT 1 row in set (... sec)
Delete¶
Deleting with a WHERE
clause matching all rows of a partition will drop the
whole partition instead of deleting every matching document, which is a lot
faster:
cr> delete from parted_table where day = 1396915200000;
DELETE OK, -1 rows affected (... sec)
cr> SELECT count(*) as partition_count
... FROM information_schema.table_partitions
... WHERE table_schema = 'doc' AND table_name = 'parted_table';
+-----------------+
| partition_count |
+-----------------+
| 0 |
+-----------------+
SELECT 1 row in set (... sec)
Querying¶
UPDATE
, DELETE
and SELECT
queries are all optimized to only affect
as few partitions as possible based on the partitions referenced in the
WHERE
clause.
The WHERE
clause is analyzed for partition use by checking the WHERE
conditions against the values of the partition columns.
For example, the following query will only operate on the partition for
day=1396915200000
:
cr> SELECT count(*) FROM parted_table
... WHERE day='1970-01-01'
... ORDER by 1;
+----------+
| count(*) |
+----------+
| 2 |
+----------+
SELECT 1 row in set (... sec)
Any combination of conditions that can be evaluated to a partition before actually executing the query is supported:
cr> SELECT id, title FROM parted_table
... WHERE date_trunc('year', day) > '1970-01-01'
... OR extract(day_of_week from day) = 1
... ORDER BY id DESC;
+----+--------------------+
| id | title |
+----+--------------------+
| 4 | Spice Pork And haM |
| 1 | The incredible foo |
+----+--------------------+
SELECT 2 rows in set (... sec)
Internally the WHERE
clause is evaluated against the existing partitions
and their partition values. These partitions are then filtered to obtain the
list of partitions that need to be accessed.
Partitioning by generated columns¶
Querying on tables partitioned by generated columns is optimized to infer a
minimum list of partitions from the partition columns referenced in the WHERE
clause:
cr> SELECT id, date_format('%Y-%m', month) as m FROM computed_parted_table
... WHERE created_at = '2015-11-16T13:27:00.000Z'
... ORDER BY id;
+----+---------+
| id | m |
+----+---------+
| 1 | 2015-11 |
+----+---------+
SELECT 1 row in set (... sec)
Alter¶
Parameters of partitioned tables can be changed as usual (see
Altering tables for more information on how to alter regular tables)
with the ALTER TABLE statement. Common ALTER TABLE
parameters
affect both existing partitions and partitions that will be created in the
future.
cr> ALTER TABLE parted_table SET (number_of_replicas = '0-all')
ALTER OK, -1 rows affected (... sec)
Altering schema information (such as the column policy or adding columns) can only be done on the table (not on single partitions) and will take effect on both existing and new partitions of the table.
cr> ALTER TABLE parted_table ADD COLUMN new_col text
ALTER OK, -1 rows affected (... sec)
Changing the number of shards¶
It is possible at any time to change the number of shards of a partitioned table.
cr> ALTER TABLE parted_table SET (number_of_shards = 10)
ALTER OK, -1 rows affected (... sec)
Note
This will not change the number of shards of existing partitions, but the new number of shards will be taken into account when new partitions are created.
cr> INSERT INTO parted_table (id, title, width, day)
... VALUES (2, 'All Good', 3.1415, '2014-04-08');
INSERT OK, 1 row affected (... sec)
cr> SELECT count(*) as num_shards, sum(num_docs) as num_docs
... FROM sys.shards
... WHERE schema_name = 'doc' AND table_name = 'parted_table';
+------------+----------+
| num_shards | num_docs |
+------------+----------+
| 10 | 1 |
+------------+----------+
SELECT 1 row in set (... sec)
cr> SELECT partition_ident, "values", number_of_shards
... FROM information_schema.table_partitions
... WHERE table_schema = 'doc' AND table_name = 'parted_table'
... ORDER BY partition_ident;
+--------------------------+------------------------+------------------+
| partition_ident | values | number_of_shards |
+--------------------------+------------------------+------------------+
| 04732cpp6osj2d9i60o30c1g | {"day": 1396915200000} | 10 |
+--------------------------+------------------------+------------------+
SELECT 1 row in set (... sec)
Altering a single partition¶
We also provide the option to change the number of shards that are already allocated for an existing partition. This option operates on a partition basis, thus a specific partition needs to be specified:
cr> ALTER TABLE parted_table PARTITION (day=1396915200000) SET ("blocks.write" = true)
ALTER OK, -1 rows affected (... sec)
cr> ALTER TABLE parted_table PARTITION (day=1396915200000) SET (number_of_shards = 5)
ALTER OK, 0 rows affected (... sec)
cr> ALTER TABLE parted_table PARTITION (day=1396915200000) SET ("blocks.write" = false)
ALTER OK, -1 rows affected (... sec)
cr> SELECT partition_ident, "values", number_of_shards
... FROM information_schema.table_partitions
... WHERE table_schema = 'doc' AND table_name = 'parted_table'
... ORDER BY partition_ident;
+--------------------------+------------------------+------------------+
| partition_ident | values | number_of_shards |
+--------------------------+------------------------+------------------+
| 04732cpp6osj2d9i60o30c1g | {"day": 1396915200000} | 5 |
+--------------------------+------------------------+------------------+
SELECT 1 row in set (... sec)
Note
The same prerequisites and restrictions as with normal tables apply. See Changing the number of shards.
Alter table parameters¶
It is also possible to alter parameters of single partitions of a partitioned table. However, unlike with partitioned tables, it is not possible to alter the schema information of single partitions.
To change table parameters such as number_of_replicas
or other table
settings use the PARTITION.
cr> ALTER TABLE parted_table PARTITION (day=1396915200000) RESET (number_of_replicas)
ALTER OK, -1 rows affected (... sec)
Alter table ONLY
¶
Sometimes one wants to alter a partitioned table, but the changes should only
affect new partitions and not existing ones. This can be done by using the
ONLY
keyword.
cr> ALTER TABLE ONLY parted_table SET (number_of_replicas = 1);
ALTER OK, -1 rows affected (... sec)
Closing and opening a partition¶
A single partition within a partitioned table can be opened and closed in the same way a normal table can.
cr> ALTER TABLE parted_table PARTITION (day=1396915200000) CLOSE;
ALTER OK, -1 rows affected (... sec)
This will all operations beside ALTER TABLE ... OPEN
to fail on this
partition. The partition will also not be included in any query on the
partitioned table.
Limitations¶
WHERE
clauses cannot contain queries likepartitioned_by_column='x' OR normal_column=x